A few months ago my dad gave me a spare computer and after a bit of research I set out on creating a home media server. A couple of weeks later I realized this wasn't just a project, it was a full-blown hobby.
After a ton of trial and error and a couple of hard drive wipes later, I've finally achieved a setup that I am truly happy with.
My goal here is to document as much of it as possible, and be as available as I can in the comments here so I can help out anyone else starting their home server adventure!
By the end of this guide, you will have a server that lets you access your media wherever you want, automatically grabs movies and tv shows when they are requested via a web UI and is optimized for seeding.
Prerequisites
Cant seem to be able to automate torrent removal upon completion (download), and sonarr fails to remove the item from the client (thus infinite seeding). Lot of “disk read error” on some downloads (thus stopping the download till a manual intervention) upon restart or extended period of time (12-24 hours).
- If you are in search of an open-source and ad-free torrent client for Windows 10, then BiglyBT might be the best pick for you. BiglyBT is basically a continuation of the Vuze/Azureus open source project.
- The first is a problem because the download client will report a download's path as /torrents/My.Series.S01E01/, but in the Sonarr container that might be at /downloads/My.Series.S01E01/. The second is a performance issue and causes problems for seeding torrents. Both problems can be solved with well planned, consistent paths.
- These notes cover — Setup the have the For torrent downloader works best Torrent Box with Ubuntu, My Torrent IP Download Pi, Home Media Server, a test torrent of 2/3 - Transmission, Sonarr, sent via Sonarr to like to get a with our without a Couch Potato, Jackett, Sonarr.tv, Sonarr and Radarr VPN service through there in uTorrent that could.
- Nzb360 is a full-featured NZB / torrent manager that focuses on providing the best experience possible for controlling all of your usenet and torrent needs. The following services are currently supported:. SABnzbd. NZBget. Deluge. Transmission. µTorrent. qBittorrent. rTorrent/ruTorrent. SickBeard / SickRage. Sonarr. Radarr. Lidarr. Bazarr. CouchPotato.
While all of the services we install will be running in Docker, this setup expects you are using Ubuntu 18.04. You can follow along, but when I start talking about mounting hard drives and writing bash scripts you may have to figure stuff out on your own!
Table of Contents
I. The Stack
II. Tips for managing your hard drives
III. Installing mhddfs (patched)
IV. Mounting Multiple Drives as One
V. Installing Docker
VI. Plex Config
VII. Transmission Config
VIII. Jackett Config
IX. Sonarr & Radarr Config
X. Ombi Config
Here's the stack we'll be using. There will be a section describing the installation and configuration for each one of these :)
Docker lets us run and isolate each of our services into a container. Everything for each of these services will live in the container except the configuration files which will live on our host.
Plex is a 'client-server media player system'. There are a few alternatives, but I chose Plex here because they have a client available on nearly every platform.
Transmission is a torrent client. I used to use Deluge but honestly found it pretty buggy and unreliable. Transmission also lets you easily run bash scripts whenever a torrent finishes which is huge.
Jackett is a tool that Sonarr and Radarr use to search indexers and trackers for torrents
Sonarr is a tool for automating and managing your TV library. It automates the process of searching for torrents, downloading them then 'moving' them to your library. It also checks RSS feeds to automatically download new shows as soon as they're uploaded! Radarr Is a fork of Sonarr that does all the same stuff but for Movies
Ombi is a super simple web UI for sending requests to Radarr and Sonarr
Tips for managing your hard drives
Here are some tips for how to manage your hard drives and data.
Optimizing for Ratios
I use private trackers to get my torrents, and this means I need to maintain a ratio. If you aren't familiar with this term, it basically means you should be uploading as much, if not more than you download.
The best way I've found to do this is to mount your drives directly to the machine that handles your downloads. This means you can configure Sonarr and Radarr to create hardlinks when a torrent finishes. With this enabled, a reference to the data will exist in your media directory and in your torrent directory so Transmission can continue seeding everything you download.
HDD vs SSD
Can also be written as Space vs. Reliability and Speed. I'm a freaking hoarder when it comes to media now, so I go with HDDs. This means I need to worry about my drives randomly dying.
Sonarr Torrent Setup
If you roll with SSDs, I envy you and you should skip this next section!
HDD Backups vs. Redundancy
HDDs are very prone to randomly dying and you need to prepare for this. You can either set up an array of drives and use something like RAID, but you usually end up losing some space and it's not very easy to expand. I'm building my library from scratch so I want to be able to expand the space on my server as I download more media.
So instead, I mount all of my drives and then use mhddfs to treat them as one file system, and what's really cool is that it automatically fills up your drives in order.
update: I still haven't found a good way to keep backups of this data and am actually working on a way around this now.
Edit: I've gotten a lot of feedback on Reddit and it sounds like using either LVM or Mergerfs + Snapraid might be a better setup. If you are interested, check this post out by Linuxserver.io! I'll be doing that soon too :)
mhddfs contains a bug where you can occasionally run into a segfault error when mounting your drives. You'll want to install it via the patch in this repo, but it's a bit tricky.
The docker installation method is outdated and doesn't run so you'll have to install fakeroot and run the command from the Readme.
It'll give you trouble about signing, ignore it and install the .deb package
To get your drives to mount on boot we have to edit your /etc/fstab file. Add the following lines at the end of your file and replace the drive IDs with your own.
This mounts both drives on /mnt/hdd1 and /mnt/hdd2 and then mounts them together via mhddfs on /mnt/media. Now let’s set up our file system with a folder for torrents and a couple for our Libraries.
This is an easy one :)
Sonarr Utorrent Setup
I also like to keep my configs in one easy place in case I want to transfer them anywhere, so let’s create a folder to hold our docker container configs and create our docker-compose.yml file
And add this to your docker-compose file. We will be filling in the services in the coming steps. If you are confused on how to add the services or how your file should look, here is a good resource on docker-compose.
This will start your Plex server on port 32400, and add the volumes /mnt and ~/docker-services/plex/config onto the container. If you are trying to move your current Plex configs over, run something like this
Note that plex is looking for your config directory to contain a single directory Library. Look for that directory and copy it over.
If you are on something other than Ubuntu, refer to this page to find your configs.
Notice how we mount our torrent drive on the container in the same location as the host, rather than something like /downloads (which is suggested over at linuxserver). This, plus the config below ensures Sonarr and Radarr send torrents to the right directory.
Once Transmission has started for the first time, it will make a settings.json file for you (and will overwrite/reset it every time you run docker-compose up). here are some changes you should make to the settings file. Come back here later to make these changes once everything is started, then run docker restart transmission.
Note: This get’s reset every time you create your container for some reason. Keep a backup!
See that script that get’s run once a torrent is done? This will search for any .rar files and decompress them in your torrents. Super helpful, let’s make that and then we’re done here!
This is super basic and just boots your Jackett service on port 9117. Doesn’t need much else!
Now, these guys are freaking TRICKY. Make sure those PUID and GUID match the ID for your user and group… and make sure that user has read-write permissions for /mnt/media. Sonarr and Radarr are going to try to be creating folders and files in there when they copy or hard link files over.
If you are running into issues, check the logs of the docker container or the logs in the web UI. It should tell you exactly where it’s having trouble. Then log into the user you set it to run as an attempt the same actions. See whats going on first hand.
This will open Ombi on port 3579 but sadly they don’t have SSL support by default. I can create a post on adding LetsEncrypt to this setup if it get’s enough traction!
Run this command to boot up all your services! Remember to go back and update your Transmission settings after this.
You now have these services running locally. Go to their web UI’s and configure everything.
Best Indexers For Sonarr
There is some final configuration you will need to do that is out of the scope of this tutorial, but I can help if need be.
You will have to
- Configure Jackett with your indexers
- Point Sonarr and Radarr to Jackett for indexers and Transmission as a download client
- Tell Sonarr and Radarr to download Movies and Shows folders you created above
- Tell Sonarr and Radarr to use Hardlinks instead of Copies in advanced settings
- Configure Ombi to use Sonarr and Radarr for requests
Sonarr Utorrent
Now go invite your friends to your Plex server